Libec NH10 / RT20C / SP-1B / RC-20
Libec NH10 / RT20C / SP-1B / RC-20
Libec NH10 / RT20C / SP-1B / RC-20
Libec NH10 / RT20C / SP-1B / RC-20
Libec NH10 / RT20C / SP-1B / RC-20
Libec NH10 / RT20C / SP-1B / RC-20
Libec NH10 / RT20C / SP-1B / RC-20


Libec NH10 / RT20C / SP-1B / RC-20

Sale priceR 29,988.55

Shipping calculated at checkout

Pickup available at Icily Durban Usually ready in 24 hours

Libec NH10 / RT20C / SP-1B / RC-20

Icily Durban

Pickup available, usually ready in 24 hours

14 Belladonna Road
Unit 17 Boulevard Park, Cornubia
South Africa


Support your small camera rig weighing up to 4kg and create smooth pan and tilt movements with this NX-100C Carbon Fiber Tripod System with NH10 Head, Ground Spreader & Carry Case from Libec. The NX-100C system includes the NH10 dual 75mm bowl/flat base video head, the RT20C carbon fiber tripod, the SP-1B ground spreader, and an RC-20 carry case.

The base of the head fits the tripod's 75mm bowl, and it is also compatible with tripods with a flat mount. It features continuous pan/tilt drag and counterbalance, a snap-on/off quick release plate, an illuminated bubble level, and a pan bar. The two-stage lightweight carbon fiber tripod weighs only 1.6kg and can extend to a height of 1540mm. The ground spreader installs at the base of the tripod to add stability to the rig. The carry case stores and transports the entire system.

Libec NH10 75mm Ball/Flat Base Video Head with Pan Handle (4kg Payload)
Designed to support small camera rigs weighing up to 4kg, the NH10 75mm Ball/Flat Base Video Head with Pan Handle from Libec features a unified ball/flat mount design. The base of the tripod can fit either in a standard 75mm bowl or on a flat mount with a 3/8"-16 screw. Having both options available means you can transfer the head from a tripod with a bowl mount to a flat mount slider.

To achieve proper balance, the NH10 head includes a snap-on/off camera plate that can slide up to 30mm of fore/aft adjustment, and it features 1/4"-20 and 3/8"-16 camera mounting screw options. The screw and locating pin are moveable to orient the plate on the camera to achieve the best possible balance. Once the camera is balanced, the continuous counterbalance and pan/tilt drag controls provide smooth movement. On the side, there are 1/4"-20 and 3/8"-16 threads to mount a variety of accessories such as a light, monitor, or extension arm.

Included with the NH10 is a pan handle that can be placed on the right or left side of the head by screwing it onto one of the mounts. The LED-illuminated bubble level helps to level the camera on uneven surfaces, even in low light.

Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl
Add a durable, lightweight tripod to your camera rig with this RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl from Libec. The RT20C offers a 75mm bowl fitting for mounting a wide variety of fluid heads. The lightweight carbon fiber legs weigh only 1.5kg. Secured by twist levers, the 2-stage legs have a height range of 370 to 1540mm. This tripod does not include rubber feet or a spreader, which can be purchased separately.

Libec RC-20 Carrying Case for NX-100C & NX-300C Tripods
The Libec RC-20 Carrying Case is designed to carry Libec NX-100C and NX-300C tripods systems. Made from a combination of materials that are resistant to water, wear, and tearing, the case has a soft non-padded lining that makes it easy to insert and remove your tripod without scratching its finish.

Made of nylon, polyester, polypropene, polyethylene, acetal plastic & thermoplastic elastomer
Combining multiple materials adds wear, water, and rip resistance
Soft unpadded interior makes it easy to insert and remove tripod without marking or marring its finish
Zipper closure
Large main compartment holds a NX-100C or NX-300C tripod system
Zippered exterior slip pocket
Open exterior slip pocket
Carrying options
Soft connecting carry handles
Carry handles are located off-center for proper load balance with the tripod system inside
Attached, adjustable shoulder strap
Weighs just over a pound empty

Key Features

  • NH10 Video Head with 4kg Payload
  • Carbon Fiber Tripod with Ground Spreader
  • System Carry Case
  • 75mm Half Ball/Flat Base Mount
  • Continuous Counterbalance, Pan/Tilt Drag
  • +90/-70° Tilt Angle
  • Snap-On, Sliding Quick Release Plate
  • LED-Illuminated Bubble Level
  • Includes Pan Handle

In The Box

Customer Reviews

Be the first to write a review